2 of 10
Any reproduction, distribution, modification, or dissemination of these instructions without written permission from Bavarian Soundwerks is
expressly forbidden and a violation of international copyright law. Any violation will result in prosecution to the full extent available under
the law!
© 2006 Bavarian Soundwerks, LLC.
2195 Defoor Hills Rd., Suite D, Atlanta, GA 30318
P: 404.963.8857 |
www.bavsound.com
Front Door Removal:
1. Start by rolling down the windows on all of the doors. This will decrease the chance of scratching
the glass or tint on the window.
2. Starting with the passenger door, locate the door handle/armrest that runs the length of the door.
You will see three indentions along the underside of this panel. There will be one towards the front
of the door near the top of the handle, one at the bottom of the handle, and one more towards the
rear. These three bolts are Torx T20. Remove them by turning them counter clockwise, and placing
them in a safe place where you won’t lose them.
3. Locate the airbag plug towards the rear center of the door panel. Remove this using your panel
popper. Pry from the top and bottom very carefully. This will reveal another Torx T20.
4. Now, look behind the chrome door handle, and you will see a small plastic black circle. Remove
this with the straight pick, and you will see another Torx T20.
5.
Driver’s side door only:
You will also need to pop out the side mirror control switch in the driver’s
door. Remove it using a small flat head screwdriver, lifting upward from the rear of the switch, and
unplug.
This may also be done when the door panel is off by using your finger to push it out
from the inside.
6. Carefully insert your panel removal tool on the front side bottom edge as shown (Figure 4). Pry
steadily outward until your hear the clip(s) release themselves.
