KSG 200 A/KSG 200 TA
Connecting the system
822-170-3
39 / 60
6.8
Securing the test area
1. Secure the work area in compliance with the road traffic regulations in your country.
2. Make sure that except for the tester, no other person is able to access the work area.
3. Make sure that unauthorised persons have no access to the device and the parts being
tested.
4. Mark the work area adequately with signs and traffic installations.
5. Pinpointing work on roads must be kept to the minimum and carried out during low traffic
hours as far as possible.
6. Discontinue the pinpointing work and clear the work area if the safety of the testing
personnel is no longer assured in the event of poor visibility conditions, e.g. fog or drifting
snow, or can no longer be assured by the use of traffic signs and installations.
7. During darkness, limit the work to urgent exceptional cases.
8. Wear a high visibility vest so that road users can recognise you better.
9. Discontinue the pinpointing work and clear the work area if the safety of the testing
personnel is no longer assured due to poor weather, e.g. thunderstorm or heavy gales.
6.8.1
Securing the test area during cable identification on live cables
1. Mark out the path for pedestrians.
2. Secure the connection cable, e.g. with cable bridges or rubber mats. The cables must be
protected against damage and there must be no danger of people tripping.
3. Mark the test area and terminals clearly. It must be very obvious that a measurement is in
progress.
4. Make sure that unauthorised persons cannot access the local mains stations.
