Baumuller BUM64A, Manual

Page: 66 / 120

Ready-for-use (= BB)
Manual Single Power Unit BUM64S/A/F
Document no.: 5.01056.03
Baumüller Nürnberg Electronic GmbH & Co. KG
66
of 118
8.3
8.2.1 Monitoring functions of feed module
The messages generated by the "infeed module monitoring functions" are transmitted
outside by using relay contacts. Simultaneously the messages are transmitted to the con-
troller and processed there.
figure 23: Position of relay contacts
Further information about messages and their respective relay contacts you will find un-
der
Z Messages over relay contacts – on page 72.
8.2.2 Monitoring functions of motor-side power module
The messages generated by the "motor-side power module monitoring functions" are ex-
clusively transmitted to the controller and processed there. Further information you will
find under
Z Monitoring functions – from page 69.
8.3 Ready-for-use (= BB)
The “ready-for-use“ message is the most important message. When a monitoring function
generates a message, that erases the "ready-for-use" message, the drive will be stopped.
There is not only one single message “ready-for-use“. If, for example there is a V-control-
ler in your BUM 64S/A/F, each drive will have four different "ready-for-use" messages.
m "ready-for-use feed module" (in BUM 64S/A/F existent and visible)
= "ready-for-use internal" (digital output X99A - 5)
= "ready-for-use external" (relay contacts X99AB - 1,2)
m "ready-for-use power module" (in BUM 64S/A/F existent and not visible)
m "ready-for-use controller" (existent in controller)
m "ready-for-use group" (existent in controller)
The "ready-for-use group" message depends on three other ready-for-use messages.
Only if the messages "ready-for-use feed module" and "ready-for-use power module" and