Baumer TA200, Operating Instructions Manual

Page: 25 / 28

TA200
www.baumer.com 25
6 Technical data
Technical data - electrical ratings
Voltage supply 115/230 VAC ±10 % (50/60 Hz)
24/48 VAC ±10 % (50/60 Hz)
24 VDC ±10 %
Power consumption 7 VA, 5 W
Sensor supply 12...26 VDC / max. 100 mA
Display LED, 7-segment display
Number of digits 6-digits
Digit height 14 mm
Unit displayed 1/s, 1/min, 1/h programmable
Programmable Measuring units 1/h, 1/min, 1/s
parameters Scaling factor
Sensor logic
Pulse frequency
Function Tachometer
Measuring principle Period duration measurement
Signal inputs Comparator inputs
Input logic NPN / PNP
Counting frequency 25 Hz, 40 kHz programmable
Scaling factor 0.0001...9999.99
Data memory >10 years in EEPROM
Standard DIN EN 61010-1 Protection class II
Overvoltage category II
Pollution degree 2
Emitted interference DIN EN 61000-6-3
Interference immunity DIN EN 61000-6-2
Approvals UL approval / E63076
Technical data - mechanical design
Ambient temperature 0...+50 °C
Storing temperature -20...+70 °C
Relative humidity 80 % non-condensing
E-connection Plug-in screw terminals
Core cross-section 1.5 mm²
Protection DIN EN 60529 IP 65 (face with seal)
Operation / keypad Membrane with softkeys
Housing type Built-in housing
Dimensions W x H x L 96 x 48 x 124 mm
Cutout dimensions 92 x 44 mm (-0.6)
Installation depth 124 mm
Mounting Front panel installation by clip frame
Weight approx. 350 g (AC), 250 g (DC)
Material Housing: Makrolon 6485 (PC)