Baumatic FI NC90, Installation, Use And Maintenance Instructions

Page: 8 / 61

9880022202-EN-040715.doc3
8
OVEN FUNCTIONS
(the symbols in the oven indicated for which functions it is set-up)
Oven light bulb (mod-GE;GEV;GG;GGV)
The oven light bulb can be switched-on independently at any time. The bulb stays on
also with other functions.
Electric grill (mod-GE;GEV)
In this selection only the electric resistance on the upper part of the oven is functioning
(the simultaneous use of the gas burner is not possible, a safety device prevents its
functioning). The feature of the grill to emanate intense heat allows the use of the oven
to grill and roast. For this type of cooking, the door must remain open. It is possible to
use the spit in models where this function is set-up. Consult the
“Use of the Grill”
paragraph
Ventilated electric grill with spit (mod-GEV)
This function allows to grill in a softer manner thanks to the use of forced air.
Depending on the models, it is possible to cook with the aid of the spit (if set-up). For
this type of cooking it is necessary to keep the door open
. Consult the “Use of the
Grill” paragraph.
Oven fan (mod-GEV; GGV)
Only the fan is functioning without any heating element. This function can be used to
defrost and/or dry the food to be cooked, only with the movement of air circulating at
ambient temperature, or for a more homogenous and soft firing, using the oven burner.
The oven fan cannot be activated during Gas Grill functioning. It is possible to use the
spit in models where this function is also set-up.
Spit (mod-GE;GG;GEV;GGV)
It is possible to use the spit in models where it is set-up. In models FISC90, the spit is
positioned transversally with the connection on the back of the oven (in models FINC90,
the connection is on the right wall of the oven) and its functioning is automatic in all
functions, even if the symbol is not present. For use, act as follows. Place the dish well
fixed with the appropriate fork hooks in the split rod and place everything inside the
split stand frame, previously set-up in its slot on the drip pan. The spit grip made of
insulating material must be used only to remove the spit rod from the oven and it must
be removed during firing