Baumatic FI NC90, Installation, Use And Maintenance Instructions

Page: 18 / 61

9880022202-EN-040715.doc3
18
Door model with profiles (remove the door from the oven)
For this door model, along with the outer glass, you can also take out the intermediate
glass (in models fitted with one)
Remove the oven door, unscrew the 4 clamping screws of the steel plates
C (fig. 5) that
lock the glass surfaces into place. The glass surfaces can now be removed by slipping
them out.
fig. 5
fig. 6 fig. 7
Carry out the same steps in reverse order to place back the glass surfaces. Take the
utmost care to ensure they are in the right order and are placed the right way round (the
clear glass must be towards the inside and the position of the lettering on the glass
surfaces must be as in (
fig. 6) . Also make sure the protective gaskets are positioned
correctly. Some models have a glass anchoring clip that must be repositioned correctly
(fig.7)
by keeping the clip
D
against the painted strip on the upper part of the door and
inserting the intermediate glass E and inner glass F into place (as shown in the figure)
Before mounting back the door, make sure the glass is firmly secured into place
CAUTION! THE REMOVAL AND INSTALLATION MUST BE CARRIED OUT
ACCURATELY AND WITH THE HIGHEST CARE IN ORDER TO AVOID
THE BREAKAGE OF THE GLASSES
Attention.
Do not remove the hinge locking hooks from their seat when the door is not
mounted in the oven. Do not close the hinges without the weight of the door as it causes
a violent closing of the springs.
Do not rest weights on the door and do not hang them on the handle, they might damage
the product and cause malfunctioning.
Moreover, do not use the oven until the oven door has been re-mounted correctly.