Baumatic FI NC90, Installation, Use And Maintenance Instructions

Page: 21 / 61

9880022202-EN-040715.doc3
21
REPLACING THE OVEN LIGHT BULB
To prevent electric shocks and/or damage to persons, read and follow the
procedure given below:
WARNING: Ensure that the appliance is switched off before replacing the lamp to
avoid the possibility of electric shock.
Ensure that the oven and the light bulb are cold, then remove the protection cover
A .
Do not touch the hot bulb with damp cloth, breakage may be caused.
Replace the light bulb with another suitable one of 25 W for 220 - 230 V with
attachment type E14
suitable for high temperatures.
In case the protection cover is damaged or broken, do not use the oven until the cover
has been replaced or re-inserted correctly and safely.
Attention: for correct installation and use of this appliance, refer to the technical
data given on the serial label of the product
.
The product label is on the edge of the internal side of the oven. A second label is
found on the cover of the instruction book.
INSTALLATION INSTRUCTIONS
The installation and technical assistance must only be performed by qualified staff.
Read the safety instructions given in this manual thoroughly before using the oven.
Incorrect installation, regulation, calibration, maintenance, assistance and use can
cause serious damage/injury to persons or objects
This product must be installed a envisioned by this manual in compliance with
National Standards and local regulations in force.