background image

5

INSTRUCTION MANUAL

ACCESSORY INSTALLATION BEFORE OPERATING 

 

„

UNPACKING AND CLEANING THE WINE COOLER

 

Remove the exterior and interior packing materials. 

 

Let the appliance stand upright for approximately

 24 hours 

before connecting 

it to the power source, which helps to reduce the possibility of a cooling-system 
malfunction from handling during transportation.

 

Use a soft cloth to clean the interior surface with lukewarm water.

 

„

LOCK & UNLOCK THE DOOR (FOR OPTION)

 

Lock is an optional function. If your Wine Cooler has such function, a key should be 
attached inside the packing of this Manual. 

 

Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock 
it, please turn clockwise. Please save the key well.

OPERATING THE WINE COOLER 

 

„

WORKING CLIMATE

 

The appliance is designed for operating from ST to T climate (see below climate class 
chart). It is recommended to maintain the ambient around 22-25°C which helps the 
appliance working with low power consumption.

Climate Class 

Ambient Temperature

SN

  10 - 32 °C   (50

ºF-90ºF)

N

  16 - 32 °C   (61

ºF-90ºF)

ST 

  18 - 38 °C   (64

ºF-100ºF)

T

  18 - 43 °C   (64

ºF-109ºF)

 

If the ambient temperature is above or below the designed climate range, the 
performance of the unit may be affected. For example, the appliance operating in 
extreme cold or hot conditions may cause interior temperatures to fluctuate, and the 
temperature set 5-22°C may not be reached sometimes.

Summary of Contents for BWC6166

















Reviews: