11
INSTRUCTION MANUAL
REVERSE THE DOOR SWING
IMPORTANT INFORMATION
We recommend that you secure the racks in place using adhesive tape to prevent causing damage when
handling the appliance and store all removed parts carefully.
1. Remove the Hole Cover and Upper Hinge Cover on top side using a flat-head
screwdriver. Remove the Upper Hinge by unscrewing the Hex Head Screws (4pcs).
Now carefully lift the Door off the Bottom Hinge with your assistant and gently set it
aside. It is important to keep the Hinge Washer
on the top of Bottom Hinge for
re-installation.
Hole Cover
Upper Hinge Cover
Hex Head Screw (4pcs)
Upper Hinge
Door
2. Remove the Lock Hole Cap, Bushing and unscrew the Flat Head Screw (2pcs) from the
top of door frame. Unscrew the Hex Head Screw(2pcs) and remove the Pivot Hinge
from the bottom of door frame. Now turn the door by 180°. Re-install Lock Hole
Cover, Flat Head Screw (2pcs) and Bushing to the top of door frame. Re-install the
Pivot Hinge to the bottom of door frame with the Hex Head Screw(2pcs). Make sure
the Pivot Hinge is installed correctly.
Lock Hole Cap
Lock Hole Cap
Bushing
Hex Head Screw
Pivot Hinge
Flat Head Screw
