Baumatic BHG642R, Instruction Manual

Page: 20 / 28

20
Reassemble all the burners carefully; in particular you should
a
bur
o
IM um flow adjustment process must
ment for hob gas taps.
All wor must be carried out by a GASSAFE
registered engineer.
IMPORTANT: Alwa
before changing the inj
ng the minimum
flow of the burners.
o
Switch the burner on
and set the knob at the
minimum position.
d
screwdriver in the
centre of the tap shaft.
o
Unscrew the adj se the gas flow or
tighten the adjusting screw to th
o
rect ad ent i ined the flame has a
length of about 4 m
o
tane/prop gas,
d in.
o
Refit the control knob.
ximum flow to minimum flow. If it does then remove
the control knob and make further adjustments to the gas
o
Repeat this process for each one of the gas taps.
o
m ke sure that the flame spreader is correctly placed on the
ner.
PORTANT: The minim
be completed before the appliance is next used.
Minimum flow adjust
k
ys isolate the hob from the electricity supply
ectors and/or adjusti
o
Remove the knob from
the tap and place a
small blade
usting screw, in order to increa
decrease e gas flow.
The cor justm s obta when
3 – m.
For bu ane the adjusting screw must be tightly
screwe
o
Make sure that the flame does not go out by quickly turning
from ma
flow, testing it again once the adjustment has been made.