Baumatic BHG642R, Instruction Manual, Page: 18 / 28

18
o
The walls behind and near the hob should be resistant to heat,
³/h for each kW of power (see total
power in kW on the appliance rating plate).
MPORTANT: The appliance MUST be connected to the gas
SP Elbow, seal, copper pipe and an
olation tap fitted in an easily accessible position.
o
tent
persons in accordance with the current edition of the Gas Safety
It is in your interest and that of safety to ensure compliance with
installers work to safe standards
of practice. The cooker must also be installed in accordance with
liability claims and lead to
prosecution.
o
Fully tighten the elbow and seal onto the gas rail.
o
Gas pressure may be checked on a semi-rapid hob burner.
o
This hob is not fitted with a device for discharging the products
of combustion. Ensure that the ventilation rules and regulations
are followed.
steam and condensation.
o
Remember that the quantity of air necessary for combustion
must never be less than 2m
Gas Safety (Installation and Use) Regulations
I
supply by use of a ½ B
is
It is the law that all gas appliances are installed by compe
Installation and Use Regulations .
o
the law.
o
In the UK, GASSAFE registered
the current edition of BS 6172. Failure to install the hob correctly
could invalidate the warranty,
o
Put the gas seal into the elbow.
o
The elbow MUST be pointing in a downwards direction.
Remove the appropriate injector and attach a test nipple. Light