37
Minimum flow adjustment for the oven burner
ll work must be carried out by a GASSAFE
registered engineer.
urning the
relative knob to the maximum position
wdriver,
turn the screw to the right to lower the
tting. They
ust be stable to prevent them from accidently going out so they
r, light the burner. While watching the flame,
osen the screw and adjust the sleeve the obtain 2.5 mm for natural
o
MPORTANT: On completion carry out a gas tightness test.
A
o
Remove the thermostat knob.
o
Switch on the oven burner by t
then wait for about 10 minutes.
o
Slowly turn the knob back to the minimum
position and, using a small scre
flame or to the left to increase it.
o
The flame must be short for an efficient reduced rate se
m
must be able to withstand normal oven door manoeuvres.
o
To adjust the primary ai
lo
gas and 3 mm for LPG.
o
Lock the screw in place once the adjustments have been made.
I
Summary of Contents for BCG905SS
Page 1: ...y 1 BCG905SS 90 cm Single cavity gas range cooker ...
Page 44: ...44 ...
