o
IMPORTANT: It should not be installed at the end of a run of
cabinets, if there is a cabinet at immediate right angles to the
cooker door.
o
The wall behind the cooker and 450 mm above and across the
width of the cooker should be an incombustible material and
preferably an easy clean surface, such as ceramic tiles.
o
Any overhanging surface or cooker hood should be at least 700
mm above the highest point on the hob top (including the
burners).
o
Baumatic do not recommend that the cooker is positioned below
wall cupboards, as the heat and steam from the appliance and
what is being cooked, may damage the cupboard and its
contents.
o
The cooker may be located in a kitchen, or a bedroom, but not in
a room containing a bath or shower. The cooker must not be
installed in a bedroom of less than 20m³ in size.
o
The cooker is fitted with four legs that can be adjusted to match
the height of your kitchen cabinets.
o
If the cooker is not level or is unstable due to an uneven floor
surface, use the adjustable feet to alter each corner until the
cooker is level.
o
To assemble them it is necessary to raise the cooker and to
screw the four legs into position, on each corner of the base of
the appliance.
o
IMPORTANT: They must be screwed clockwise into position and
not just slotted into the holes on each corner. You must screw
them through the brackets that are also provided.
27
Summary of Contents for BCG905SS
Page 1: ...y 1 BCG905SS 90 cm Single cavity gas range cooker ...
Page 44: ...44 ...