manualshive.com logo in svg

Baum 714XA A-2-P-1, Instruction Manual

Share
Download
Baum 714XA A-2-P-1 Instruction Manual Download Page 28

   PAGE  25                                                                          TP10583

 This indicates that the paper length and the fold choice are not compatible.  Go to the

choice screen or the paper length screen and change one of the selections.

Non- fault status states:

       

 This state shows the machine is 

“ready” to start

. On the production

screen pressing the status button in this state will start the machine.

       

 

This state shows the machine 

is currently running

. 

Pressing the

 

status button in

this state will request the machine to stop.

      

  

This state shows the machine

 

is in the paper clear mode

.  

After a regular

stop is requested, this 3 second delay allows the paper in the fold pans to move through

to the delivery before it stops.

This state

 

shows the fold pans are moving.

      

  

This

 shows the machine has reached a requested stopping

point. 

This state triggers after the summation stop on a single batch is complete or the

requested grouping of variable batches is completed.  The operator acknowledges

ready to continue by pressing this button on the production  screen.  Then it will return

to the ready status (partial green circle).

Summary of Contents for 714XA A-2-P-1


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands