29
DRAIN HOSE
•
Fitting the drain hose.
Remove elbow from the drum and insert into the
free end of the drain hose.
Install drain hose either a the siphon trap or, using
the elbow, hang over the edge of a wash basin or
sink (see Fig.). Small hand basins are not suitable.
Max. drain height: 1.25 m
Use identical hose type if extension is required.
Secure the connections with hose clamps.
Max. drain hose length 2.50 m.
Important:
drain hose must be installed without kinks and
must be secured against dropping during
operation.
CONNECTION TO THE MAINS
•
Observe local utility company regulations.
•
The appliance must be connected to the mains
exclusively by means of a socket with an earth
connection in accordance with established
regulations. Earthing is required by law. The
manufacturer declines all responsibility for injury to
persons or pets, or damage to property caused by
non-compliance.
•
The data concerning voltage, consumption and
necessary fuse are supplied on the inside of the
appliance door.
•
The mains connection cable may only be replaced
by a qualified electrician.
•
The appliance conforms with European safety
regulations and EC guidlines No. 93/68/EWG and
EN 60555.
•
A pulse current sensitive device must be used in
connection with this appliance if a residual current
breaker is used, regardless of whether it is an
existing installation or a new installation.
•
Do not use extension leads or multiple sockets.
INSTALLATION INSTRUCTIONS
