Page 13
For technical questions, please call 1-888-866-5797.
Item 64995
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
replacing nylon Line
tO prEVEnt SEriOuS inJury:
Only replace the line on this tool with the line material and diameter of line listed on
the Specifications table. Other materials, such as wire, rope, or blades can damage the
tool and be forcefully and dangerously ejected from the tool upon breaking.
1. Remove Battery Pack.
2. Press tabs on Spool Cover, remove Spool Cover,
then remove Spool from Spool Housing.
3. Remove old line from Spool.
4. Clean interior of Spool Housing with soft cloth.
tabs
Spool
Housing
Spool
Spool
cover
Line
Outlet
Line
cutter
5. Insert end of Nylon Line (up to 10 feet)
into Line Insertion Hole.
6. Wrap Line onto Spool in neat, straight rows, under
tension, following arrow direction on top of Spool.
Line insertion
Hole
nylon
Line
7. Replace Spool, insert Line through Line Outlet in
Spool Housing and pull line out past Line Cutter.
8. Replace Spool Cover.
