Bauer BG 25, Instruction Manual

Page: 94 / 183

RIGGING / DE-RIGGING
BG 25 / 2011 /
2254_BG25_en_0000498763_V01
7 - 11
7.5.3.2 Installing the Upper Crowd Rope

Select "winch rigging" mode.

Extend rope tensioning cylinder (1).

Remove crowd sledge stoppers from transport position (2) and install them at upper
end of mast (3).
7 3
1
3
5 3
2 6
4 6
2
7
1
5 4
BFASE192.wmf

Remove crowd rope from transport deposit.

Move crowd sledge down to lowermost point.

Pass end of rope behind guide sheave (4), up and around upper left guide sheave
(5) down to guide sheave on sledge (6), counter-clockwise back up to sheave (7) on
upper end of mast to rope tension cylinder (1).

Anchor rope end with wedge to rope tension cylinder (1).
WARNING!
Serious injury hazard!
3 wraps of upper crowd rope and 3 wraps of lower crowd rope must be
installed on the drum of the crowd winch, for safety reasons.

Retract rope tensioning cylinder to tension the crowd ropes.

Run the crowd sledge up and down several times.

Run the crowd sledge down to the lowermost point.

Retract rope tensioning cylinder to re-tension the crowd ropes.