Baudoulin 6 M26.2, Operating And Maintenance Manual

Page: 64 / 121

- 2/4 -
00373 - Edition 01 - September 1
1
Engine operation
C
200 - Starting the engine
Non-contractual
illustrations
Engine with manual pre-greasing pump
b
Check that the 3-way valve is in " pre-greasing " position
as indicated below.
b
Pre-grease the engine using the manual oil draining pump,
with the engine switched off.
DT 11.G04
DT 11.G06
b Make sure the drive components are disengaged in Neutral
position.
b Check that the acceleration control is in " Idle " position.
b Start the engine with the fi ring key in "
Start
" position on the
control panel (see DT 11.G04 ) or via the cabinet of the
machine room (see option DT 11.G06 ), press the " START "
push button it the " Start " switch is in " ON " position.
b
Once the engine has started, the speed stabilises at
700 rpm.
Never exceed an engine speed of 1,000rpm until engine
water temperature reaches 60°C.
Sump pump
Oil change
Pre-greasing