- 3/4 -
00364 - Edition 01 - September 1
1
Maintenance
D
500 - Maintenance operations
Every 800 hours (P1 Service)
Every 600 hours (P2 Service)
M2
Non-contractual
illustrations
PR Catalogue
see chapters
04
05
08
Lever position not to
be used
Replacing the water separator filter cartridge
- option (ref. 77 72 884 0V)
b
Isolate the diesel valves, remove the filter cover (
1
), and
remove the filter cartridge.
b
Clean the vat.
b
Fit the new cartridge, fit the cover (
1
) back
on the vat, carefully replacing the seals (
2
)
(ref.
77 72 884 1W
).
b
Open the diesel valves and bleed the filter.
Catalogue
P.R.
05
Filter
cartridge
Replacing the centrifugal filter cartridge
(ref. 15 04 901 0V)
b
Unscrew the upper 17'' nut (
5
).
b
Remove the bowl (
1
).
Warning: if the nut (
4
) comes unscrewed with the bowl, it
should be removed and refitted to its holder during
reassembly (tighten to torque 20m.N)..
b
Remove the cartridge (
2
) and the seal (
3
).
b
Clean inside the bowl and the holder.
b
Fit a new cartridge and replace the seal (
3
) provided with
the cartridge.
b
Refit the bowl and tighten to a torque of 20Nm, so that it is
not distorted.
Do not use the fuel filter while the lever is in vertical
position as this position operates both cartridges at
the same time.
2
1
1
5
4
2
3
Environmental precaution
There are laws regarding environmental protection and the
disposal of waste and hydrocarbons. To ensure compliance
with environmental protection laws, consult your local
authorities who will advise you.
Summary of Contents for 6 M26.2
