22
GB
Battipav srl
RESIDUAL RISkS
During the design phase, BATTIPAV SRL paid
particular CAUTION to the aspects that may generate
risks for the safety and health of operators.
In spite of this, there are still some potential risks,
which are described below:
CAUTION
• Danger of presence of electric current.
The machine has an internal electric system:
coNNect the MachiNe to a SySteM with
DIFFERENTIAL PROTECTION AND EFFECTIvE
EARTH WIRE.
CAUTION
• Danger of prolonged exposure to noise:
The continuative use of the machine causes an
exposure to noise levels above 85 dB (A).
OPERATORS MUST USE PROPER EAR
DEFENDERS.
CAUTION
• Danger of exposure to fragments of
materials.
OPERATORS MUST WEAR
PROTECTIvE GOGGLES.
CAUTION
• Danger of accidental contact with the moving
tool.
oPeratorS MuSt wear heaVy ProtectiVe
GLOvES
aLwayS Stay iN the workiNG PoSitioN
(Pos. 1 picture 10) DURING THE MACHINE
OPERATION PHASES:
• During material loading;
• During material cutting;
• During the cutting tool deceleration following the
machine stop.
MAINTENANCE
CAUTION
BeFore PerForMiNG aNy oPeratioN or
ADjUSTMENT, DISCONNECT THE MACHINE FROM
the SuPPLy MaiNS.
CLEANING
CAUTION
DO NOT WASH THE MACHINE WITH HIGH
PRESSURE WATER jETS
15
It is extremely easy to clean the VIP machine by
loosening the side knobs and dismantling the
working table.
Through the side tap remove any working
residual.
16
17
When necessary clean the sprayer as
shown.
CAUTION
18
MOTOR CARRIAGE ADjUSTMENT
The motor carriage is provided with a register for
the vertical play adjustment.
If any excessive play of the motor carriage
should take place, act as follows:
1) Loosen the register fixing nut with a 10 mm
wrench;
2) Screw down the dowel with a 3 mm Allen key until
the play is eliminated.
3) Lock the register again with the fixing nut.
