background image

Product Specifi ca  ons

Safety Features

Ba  ery Management Unit (BMU) provides internal protec  on  

 

 

against thermal runaway (overhea  ng), over voltage, over charging,  

 

over discharging, over current, and short circui  ng. 

Aluminum alloy shell for maximum cell protec  on and durability. 

Meets FAA requirements (< 100 Wh) for lithium-ion ba  eries taken  

 

in carry-on baggage during air travel.

The Freedom™ CPAP Ba  ery has been UN 38.3 tested and meets all  

  

current safety regula  ons and shipping requirements.  

Cell Type:

 Industrial grade rechargeable lithium-ion cells (LG® brand)

Capacity:

 97.68 Wh

Output Voltage Range:

 9V-12.6V DC

USB Output Voltage:

 5V DC | 2A

Output Current:

 8A maximum

DC Input Voltage Range:

 12.6V-17V

AC Power Supply Input Range:

 100-240VAC | 50-60Hz |1.5A

AC Power Supply Output Current:

 13.5V | 6.75A

Charging Condi  ons:

 32°F to 104°F 

Discharging Condi  ons:

 23°F to 104°F   

 

 

 

(ba  ery capacity can be reduced by as much as 30% when discharging between 23°F to 32°F)

Storage Condi  ons:

 -4°F to 104°F (op  mal range: 60°F to 80°F)

Power Gauge:

 Digital display charge level indicator 

Charge Time:

 4 hours (per ba  ery)

Life Span: 

400-500 charge/discharge cycles 

(see page 30 for more informa  on)

Size:

 7.5” x 4.8” x 0.8” 

(L x W x H)

Weight:

 1.7 lbs.

2

Summary of Contents for Freedom CPAP Battery





































Reviews: