Battery Power Solutions Freedom CPAP Battery User Manual Download Page 6

Safety Warnings 

The following safety warnings are to be followed at all   mes! 



Do not drop, hit, crush, or otherwise cause any impact damage to the 
ba  ery as this may result in exposure of the cell contents. 

  Do not expose the ba  ery to open fl ames, heaters, incinera  on or  

other extreme heat, including long term exposure to direct sunlight, 
as exposure to extreme heat may result in a hazardous reac  on.

  Do not expose the ba  ery to moisture of any type.

  Do not disassemble or a  empt to repair the ba  ery, AC power supply 

or any other charging or connec  on components supplied by Ba  ery 
Power Solu  ons as there are no user-serviceable parts inside. 

  Do not use any AC power supply or other charging cable not supplied 

by Ba  ery Power Solu  ons for use with the Freedom™ ba  ery as   
doing so may result in a hazardous reac  on. 

  Do not charge the ba  ery on any fl ammable surface.

  Regularly  inspect  connec  on  cords  and   ps,  the  AC  power  supply, 

and any charging cables for damage or signs of wear and discon  nue 
use if damaged.

Warranty & Usage Disclaimer

  All Battery Power Solutions products are under warranty for  

manufacturing and quality defects for 1 (one) year. 

  This warranty does not cover damage resul  ng from modifi ca  on of 

or  improper  use  or  opera  on  of  the  product  that  is  not  consistent 
with the instruc  ons in this manual.

  By  purchasing,  using  or  possessing  any  Ba  ery  Power  Solu  ons               

product, you are agreeing to hold harmless Ba  ery Power Solu  ons, 
its  subsidiaries,  affi

  liates,  owners,  offi

  cers  and  employees  from  any 

and  all  claims  or  liability  for  any  damage  to  any  property  or  injury, 
illness or death of any person when such damage, injury, illness or 
death shall be caused in whole or in part from use of the product(s).

3

Summary of Contents for Freedom CPAP Battery





































Reviews: