Battery Power Solutions Freedom CPAP Battery User Manual Download Page 23

Air Travel Usage

The Freedom™ CPAP Ba  ery meets current FAA requirements for spare 
lithium-ion ba  eries (not installed in a device) taken in carry-on baggage 
as  each  ba  ery  is  less  than  100Wh  (97.68Wh)  and  is  protected  from 
damage and short circuit. Spare lithium-ion ba  eries are not allowed in 
checked baggage and must only be taken in carry-on baggage. 

TSA security, individual airline, and interna  onal rules may, at   mes, be 
more restric  ve. If you are planning to use the Freedom™ ba  ery during 
fl ight it is recommended that you contact your airline as they may have 
specifi c requirements regarding the use of PAP devices and/or lithium-ion 
ba  eries during fl ight. For more informa  on view the FAQ sec  on on our 
website at www.ba  erypowersolu  ons.net.

Power Backup Usage

The Freedom™ CPAP Ba  ery can be used as a true ba  ery backup system 
for your PAP device during power outages. When you sleep you may leave 
your PAP device connected to the ba  ery and then plug the ba  ery into 
a wall outlet. In the event AC power (power from a wall outlet) is lost the 
ba  ery will automa  cally begin powering your PAP device uninterrupted.

When AC power is available it will bypass the lithium-ion cells within the 
Freedom™  ba  ery  and  power  your  device  normally  without  degrading 
the overall lifespan of the ba  ery as the cells of the ba  ery will not  
con  nuously be charging and then discharging.

You may use the Freedom™ ba  ery in this power backup scenario using 
a single ba  ery or in the dual ba  ery confi gura  on; however, 

in the dual 

ba  ery confi gura  on you will need to purchase an addi  onal DC power 
pigtail cord

 in order to connect both ba  eries to the AC power supply of 

the ba  ery and then both ba  eries to your PAP device.

When  not  in  use  we  recommend  disconnec  ng  the  AC  power  supply 
and the PAP device from the Freedom™ ba  ery to allow the ba  ery to 
completely shut down.

20

Summary of Contents for Freedom CPAP Battery





































Reviews: