23
Additional general information on the safety instructions for grinding machines
WARNING Only use this machine if you are familiar with belt grinders
and grinding techniques. If in doubt, contact an experienced person.
ELECTRICAL SHOCK Working with power tools involves the risk of
electric shock.
Contact with electrical cables can put metal parts of the tool under
voltage and cause an electric shock to the user. Ensure that the
machine wiring is such that no loose cables can touch the machine.
Have the wiring carried out by a qualified electrician.
Do not use the machine until it has been completely assembled and you have read
the operating instructions completely.
Work only on the grinding surfaces specified in these operating instructions and
never in any other places. When machining workpieces, stand in front of the
machine and not beside it.
Make sure that the belt is straight and correctly tensioned before putting it on.
Make sure that an attachment is firmly and correctly aligned with the abrasive belt
on the machine before switching on the machine.
Make adjustments only when the machine is switched off.
Only change attachments and belts when the machine is switched off.
Disconnect the power supply and disconnect the plug when you leave the machine.
Remove the belt when you leave the machine. Never disconnect the machine while
it is still in motion. Switch off the machine and wait until it has come to a complete
stop before leaving.
Always make sure that the work table on which the machine stands is safe and
cannot vibrate or move.
