61
4 Transport and storage
4.1 Transportation
Requirements for the installation site
The workshop lighting must comply with the applicable safety regulations.
See chapter Installation and Assembly.
Read these instructions completely if the machine is to be used and installed
elsewhere.
Transport equipment
If necessary, it is recommended to use transport aids (e.g. forklift trucks, hoists).
For transport
An electrician must disconnect the cable and the start and power buttons and
ensure that the machine is disconnected from the power supply.
Transporting the machine
- Take the weight of the machine into account when transporting and moving.
- If necessary, it is recommended to use aids (e.g. forklift truck, hoist) during
transport and movement.
Unpacking the machine
Check the tool, parts or accessories for damage caused during transportation.
If any part is damaged or missing, immediately notify the seller. Do not tear up the
packaging or use the machine until you have checked that the parts are in order.
Be careful when lifting the machine. It is quite heavy, about 35 kilos.
Do not lift the machine by the lever with the spring as this could damage and
loosen the spring and cause the machine to fall out of your hands.
Make sure that the working area is well lit and that you are not working in your
own shadow.