32
3.2
Meli94H/V
variant
Design of the Meli94H/V variant
Part
Function
1. Motor
Drive wheel drive
2. Drive wheel
Drive of the abrasive belt
3. Abrasive belt
Grinding of workpieces on the grinding surfaces intended for
this purpose.
4. Base plate with mounting holes
Mounting the machine on a worktable
Attachment of the machine to a
worktable
Carrying the support arm and the tensioning mechanism
6. Tensioning and aligning
mechanism for abrasive belts
For tensioning and aligning the grinding belt, consisting of:
6a. a belt drive knob
6b. a spring tension handle
6c. a spring
6d. and an alignment roller
7. Support arm (a)
Guide the sanding belt with two rollers and provide the
sanding surface and thus the place where the workpiece can
be ground. The worktop a) is attached to the support arm a).
8. 8. Worktop (a)
Worktop for stabilizing the workpieces . The worktop (a) is
available in three versions: large, small and tiltable.
9. Support arm (b)
Straightening the abrasive belt and providing the grinding
surface and thus the place where the workpiece can be
ground. Attachment of the large wheel, roller and worktop
attachments b).
10. Attachment parts: large wheel
and roller set
Alignment of the sanding belt and provision of the sanding
surface and thus the point at which the workpiece can be
ground.
11. Worktop (b)
Worktop for stabilizing the workpieces when using a large
wheel and roller set in combination with the support arm b).
12. Hinge with fixing holes
Mounting and stabilization
13. Handle
To tilt the machine.
14. Switch ON/OFF
For switching the machine on and off.
15. Mounting button for the support
arm
For securing support arm a) and support arm b).
