65
7 Operating and display elements
7.1 Overview and position
The figure in section 7.2 shows the position of the controls.
7.2 Construction
See Figure 44a for the setup.
7.3 How it works
This table lists the functions of the controls.
Part
Funktion
1. Switch ON/OFF
For switching the machine on and off.
2. Handle
To tilt the machine.
3. Tensioning and aligning
mechanism for abrasive belts
For tensioning and aligning the grinding belt, consisting of:
a. a belt adjustment knob
b. A spring tension handle
c. a spring
d. an alignment roll
4. Fixing button for the support
arm
For securing support arm a) and support arm b).
5. C
ylinder head
screw
a.
a. Allen key (2x) for fixing the worktop a) Small and large on
the support arm b).
b.
b. Allen key (2x) for fixing the worktop a) Identifiable on the
support arm b).
7.4 Notes on the remote controls
There is no remote control for this system.
