EMD-CM and RM User’s Manual
If using a forkli , do not li the detector from its
body between the flanges. The housing could be
accidentally dented and permanent damage could
be caused to the internal coil assemblies.
4.2. Storage
• Pack the measuring device in such a way as to protect it reliably against impact for storage
(and transporta on). The original packaging provides optimum protection.
• The storage temperature corresponds to the opera ng temperature range of the measuring
transmi er and the appropriate measuring sensors
• Do not remove the protec ve plates or caps on the process connec ons until you are ready to
install the device. This is particularly important in the case of sensors with PTFE linings.
• The measuring device must be protected against direct sunlight during storage in order to avoid
unacceptably high surface temperatures.
• Choose a storage location where moisture does not collect in the measuring device. This will help
prevent fungus and bacteria infestation which can damage the liner.
4.3. Moun ng
Recommended positions for sensor installa on
27
