EMD-RMTR.. User’s Manual
13
6.1.2 Func on Keys for Parameters Se ng
At measuring status, press “Compound” + “Enter” keys ge ng to the select of parameter and transfer
password (0000), and then reset the password with one of the new passwords that are provided by
manufacturer. Press the “Co“Enter” keys to work in Parameters Se ng Way.
There are 6 Passwords in design and Four Passwords for operators, the other Two Password are fixed
passwords for system opera on.
6.1.3 Func ons Select Menu
Press “Co“Enter” keys to the func ons select menu, push “Up” or “Down” keys to select, there are
three func ons:
Code
Func ons
Notes
1
Parameters Set
Enter Parameters Se ng
2
Clr Total Rec
Total Flow Reset
3
Fact Modif Rec
Check the factor’s Modification Record
6.1.3.1 Parameters Set
Press “Co“Enter” key, it displays “Parameters Set” func on. Input password. Press
“Co“Enter” key, it ge ng to Parameters Se ng status.
6.1.3.2 Clr Total Rec
To push “Co“Enter” keys ge ng to the select of parameter, then push “Up” key to “Clr Total Rec”,
input the passwords. When the passwords becomes “00000”, this func on is done, the gross is 0 in the
instrument.
6.1.3.3 Fact Modif Rec
To push “Co“Enter” keys ge ng to the select of parameter, then push “Up” key to “Fact Modif
Rec”(Detail consult the AppendixFive)
6.1.4 Se ng Parameters in Menu
There are 54 parameters of –RM series, user can set every parameter. The List of Parameters is shown below:
Se ing Parameters in Menu
Code
Parameter words
Set ng Way
Grades
Range
1
Language
Select
2
English
2
Comm Addres
Set count
2
0
～
99
3
Baud Rate
Select
2
600
～
14400
4
Snsr Size
Select
2
3
～
3000
5
Flow Unit
Select
2
L/h
、
L/m
、
L/s
、
m3/h
、
m3/m
、
m3/s
