Basler L301kc, Installation And Operating Manual

Page: 117 / 124

Revision History
Basler L301kc i
DRAFT
Revision History
Doc. ID Number Date Changes
DA00051801 27 Mar 2002 Initial release covering prototype cameras only.
DA00051802 31 May 2002 Initial release covering series cameras.
DA00051803 7 Feb 2003 Revised to include instructions for using the Camera Configuration Tool Plus
(CCT+).
DA00051804 29 May 2003 Revised the spectral responsivity graph on page 1-3 .
DA00051805 1 Dec2004 Revised Table 2-3 and added cross references to clarify the dual pixel mode
bit assignments.
Revised Figure 2-3 to show which ports are assigned to each Camera Link
transmitter and receiver.
In Section 5.3 , added sensor horizontal and vertical position tolerances refer-
enced to the sides of the camera.
DA00051806 13 Jul 2007 Updated the cover page and the contact information page to the current stan-
dards.
Added storage temperature and humidity specs to Section 1.2.1 .
Added warnings about not reversing input power polarity to Sections 1.3 ,
2.1.2 , and 2.8 .
Corrected the connector part numbers in Section 2.1.3 .
Corrected the description of the camera reset command in Section 4.2.6 .
Corrected the steps shown in Section 4.2.10 for changing the serial commu-
nication bit rate.
Added Section 6.3 that describes what information customers should gather
before calling support.