BO.sensor
Manual
9
/
39
v.1.7
© 2014 basalte
5.
all command
For example:
When you’ve selected TV on your remote you will receive the value 128 in the
group object 1 video command
When you’ve selected LIGHT on your remote you will receive the value 155 in the
group object 2 light command
NOTE: The Beo commands as described in Appendix A should be considered as native
Beo commands. These values are not corresponding to the values used by the KNX
control objects.
1.6
KNX control object
When enabling audio or video function, 1-byte
control objects
are used for transmitting KNX
commands. These objects are TV control, DVD control, RADIO control, CD control,… depending on
the sources enabled in ETS. Combined with a Basalte B.link, other A/V devices can be controlled by
the Beo 4 or Beo 6 remote control.
When you press a button on your remote, a value from the table below will be send to the
corresponding control object.
KNX CONTROL OBJECT
Beo Remote
KNX Value
Beo Remote
KNX Value
Button 1
1
PLAY_LONG
21
Button 2
2
NEXT
22
Button 3
3
PREVIOUS
23
Button 4
4
NEXT_LONG
24
Button 5
5
PREVIOUS_LONG
25
Button 6
6
STEP_UP
26
Button 7
7
STEP_DOWN
27
Button 8
8
STEP_UP_LONG
28
Button 9
9
STEP_DOWN_LONG
29
Button 0
10
MENU
30
GREEN
11
NAVI_UP
31
YELLOW
12
NAVI_DOWN
32
RED
13
NAVI_LEFT
33
BLUE
14
NAVI_RIGHT
34
GREEN_LONG
15
GO/SELECT
35
YELLOW_LONG
16
BACK/EXIT
36
RED_LONG
17
RECORD
37
BLUE_LONG
18
TEXT
38
PLAY
19
GUIDE
(1)
39
STOP
20
INFO
(1)
40
(1)
: Only applicable for BeoRemote One
