BAS-IP SH-42, User Manual

Page: 3 / 8

EAN: 5060514910559
Connection options
RS-485 input
The option of connecting to an individual or multi-apartment call panel
using the RS-485 interface.
In this case, the call panel is connected to the module via four wires: + 12 V power supply, Ground, 485+ and 485-.
With such a connection, it is possible to control two relays independently of each other.
+12V DC
Ground
485+
485-
Lock
+12V DC
Ground
485+
485-
SH-42
(RS-485)
Outdoor panel
(RS-485)
The option of connecting to a multi-unit call panel or to an external
low-voltage signal source using the control input «Lock».
In this case, the module is connected to the call panel with three wires: +12 V power supply, Ground, and Lock.
With this connection, it is possible to control only the first relay. When an external control signal module is applied
to the «Lock» input,
only the first relay will act on switching. For the « Lock » input, it is necessary to use
a low-voltage external signal with a DC voltage from +9 to +12 V.
+12V DC
Ground
485+
485-
Lock
+12V DC
Ground
Lock
SH-42
(RS-485)
Outdoor panel
From the external
signal source
Relay Outputs
It is possible to connect both electromagnetic and electromechanical locks
to the relay outputs. In this case, two relays are independent of each other
and allow you to connect two electromagnetic locks or two electromechanical
locks. It is also possible to connect to the first relay of an electromechanical
lock, and to the second relay of an electromagnetic lock, and the opposite
is allowed to the first relay of an electromagnetic lock, and to the second
electromechanical lock.
Completness check of the product
Before installing the mo dule , be sure to check that it is complete and all
components are available.
The mo dule kit includes:
Module
Manual
Wire with connector
Installation screws
1 pc
1 pc
1 pc
2 pcs