14
access to condenser and/or water pressure valve, allow sufficient space at front of the machine. Be sure that
flooring is firm and even.
Water and Drainage
Water quality influences ice hardness, flavour, and quality as well as condenser life.
Keep in mind the following points:
a) WATER IMPURITIES: Major impurities are eliminated by filters provided. Filters should be cleaned
regularly depending on purity of water. For minor impurities we recommend installing a 5-micron filter
(Provided with the unit: Part # ITV 207499).
b) WATER WITH MORE THAN 500 PPM: Ice will be less hard and tend to adhere. Lime deposits may
impede proper function. In water cooled models, condenser obstruction is likely. Installation of a high
quality water softener is recommended.
c) CHLORINATED WATER: Chlorine taste can be avoided by installing a carbon filter (Part # ITV
207509).
(NOTE: You may encounter water with all aforementioned properties.)
d) PURIFIED WATER: A 10% reduction in overall production may occur.
Connecting Unit To Water Source
•Use 1.3 m. flexible tube (with two filters attached) provided. NOTE: We advise using a single faucet fixture
.
•Water pressure should be between 0.7 and 6 Kgs/cm2. (10/85 Psi.)
•If water pressure exceeds these values, installation of appropriate corrective units will be necessary.
•It is important that water tubing does not come close to or in contact with any heat sources or heat
generated by unit as this could decrease production.
Summary of Contents for QUASAR 90 C
Page 6: ...6...
Page 8: ...8 STOCK THERMOSTAT WATER INLET ELECTRICAL CONNECTION...
