21
3)
Hold agitator paddles so that water pan releases water.
4)
Once the water pan returns to its horizontal position again, switch off the machine. Pour 3 litres of water
and one half of di-caloid lr) into water pan
5)
Allow the solution to work for 20 or 30 minutes, occasionally turning the paddles by hand so that they
are also cleaned.
6)
Turn on the machine and hold paddles so that pan releases water.
7)
Open the water inlet faucet and allow the water pan to fill with water.
8)
Dissolve a spoonful of sodium bicarbonate in a glass of water, then pour solution into water tray. Wait 5
minutes.
9)
Repeat (6) several times until water pan has been thoroughly rinsed.
WARNING:** Discard ice produced during cleaning procedure.
Cleaning the ice bin
1) Unplug the machine, turn off water supply, and empty storage bin of ice
2) Wipe with a kitchen cloth soaked in detergent
3) If white lime stains do not vanish, rub with some lemon or vinegar, wait for a few minutes and wipe with
the cloth again.
4) Rinse with plenty of water, dry, and run the machine
Cleaning the outside of the machine
Follow the same procedure as for the ice bin.
Cleaning the water inlet filters
These round wire gasket filters placed on either end of the water hose to mains, often become blocked in the
first few days of use, especially when the plumbing installation is new. Clean them under a jet of water.
Summary of Contents for QUASAR 90 C
Page 6: ...6...
Page 8: ...8 STOCK THERMOSTAT WATER INLET ELECTRICAL CONNECTION...
