Bartscher MX 235 Plus, Instruction Manual

Page: 48 / 172

- 44 -
6. Cleaning und maintenance
WARNING!
Before cleaning, disconnect the device from the power
supply (pull the plug!).
Never use pressurized water for cleaning the device!
Make sure that no water gets into the device.
CAUTION
The following products may not be used for cleaning the device:

steam pressure washers;

compressed air stream for cleaning of areas with flour and generally for
cleaning the device;

cleaning agents containing chlorine (also diluted) or chlorine-based, like:
sodium hypochlorite, hydrochloric acid, pipe cleaners, marble cleaners, scale
removers, etc. They may damage the steel surface and cause irremovable
stains or corrosion. Such products may become oxidized and in some cases
cause pitting of steel;

metal plates, brushes or polishing discs from other materials or alloys (e.g.
common grade steel, aluminium, brass, etc.) or tools used previously for
cleaning of other metals or alloys;

petrol, solvents or flammable and/or corrosive fluids;

silver cleaning agents.
Cleaning of the device
o
Before cleaning and during cleaning, never touch moving parts of the device without
making sure that they stopped and the device is disconnected from the power supply.
o
To avoid electric shock, never immerse the device, power cord or plug in water or
other liquids.
o
Never place or put away the device directly to the sink or under the tap. Always make
sure no water gets inside the device.
o
The device must be cleaned after each shift, before the daily use, or more frequently
when required.