- 33 -
5. Installation
5.1 Positioning
Before the operation unpack the device and remove all package material.
CAUTION!
Never remove the rating plate and any warning signs from the device.
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
Never
place the device on a flammable surface.
Do not
place the device near an open flame, electric oven or other source of heat.
Do not block or cover the ventilation ducts the device. Doing so may lead to
overheating of the device.
Keep a distance of at least 5
– 10 cm from flammable walls and other objects.
Do not place the induction plate near other equipment and objects sensitive to
magnetic fields (e.g. radio, television, etc.).
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.2 Electric connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation the local power grid specification
should be compared with that of the device (see type label).
Connect the device only in case of compliance!
The device must only be connected to a properly
installed single socket with protective contact.
The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.
