- 39 -
Storage of the device
o
If the device is to remain unused for a longer time, clean it according to the above
mentioned description and store in a dry, clean place protected against cold and
sunlight and inaccessible to children. Do not place any heavy objects on the device.
8. Possible malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Error
code
Cause
Solution
E0
No cookware or inappropriate
cookware.
Do not use the device without
appropriate cookware.
E01
The device becomes too hot
(e.g. due to blocked
ventilation ducts).
Parts are damaged
(e.g. transistor).
Clear / unblock ventilation ducts.
Leave the device to cool down for a
few minutes; the device is ready for
operation afterwards. Contact the
technical service if the error message
remains displayed after the device
has cooled down.
Contact the technical service
E02
Overheating protection was
activated and the device
switched off.
Remove the cookware from the hob.
Leave the device to cool down for a
few minutes. The device is ready for
operation afterwards.
E03
No voltage temporarily.
Disconnect the device from the
power supply (pull the plug!).
Switch the device on after a few
minutes. An electrician should
check the power connection.
If you cannot remove the malfunctions:
-
do not open the body,
-
notify the customer service point or contact the sales
agent, while providing the following information:
type of malfunction;
article and serial number (rating plate at the
rear of the device).
