Bartscher 825131, Instruction Manual, Page: 30 / 56

- 28 -
5. Installation and operation
5.1 Assembly and Installation
Required Tools:
•
Philip Screwdriver / Adjustable Spanners / Wrenches.
•
Leak Detection Solution one part detergent and three parts water.
•
Before assembly, make sure all packing material and any transmit protection has been
removed.
•
Assemble all nuts and bolts loosely at first. Tighten all connections after completion of
assembly. This eases your work and increases the stability of your appliance.
•
Small deviations in equipment may occur. This is no lack of quality but subject to
improvements.
Assembly
STEP 1:
Screw rear panel of housing to th
e base with 5pcs bolts M5*12 and
5pcs washer. (Detail Fig. A)
STEP 2:
Push the housing lid over rear panel
of housing and place onto rear panel of
housing. Screw together the housing lid
and rear panel of housing with 5pcs bolts
M5*12 and 5pcs washers. (Detail Fig. B)
STEP 3:
Fixing the post upwards onto the housing
lid with 4pcs bolts M5*12 and 4pcs washers,
then put plastic cover through the post.
(Detail Fig. C)
Detail Fig. A
Detail Fig. B
Detail Fig. C