Description buttons of control panel
START/STOP
After having connected the machine to the power supply,
press
this button to progress the machine from a state of
inactivity
(Off) to one of Stand-by, in preparation for setting
the desired cycle. This button is also used to start/interrupt operation
during
the
blast chill/shock freeze/conservation cycle.
UP
Increase values, displays the temperature of the food probe.
DOWN
Decrease values, displays cycle time elapsed.
+3°C BLAST CHILL
Selection of blast chill at +3°C
–18°C SHOCK FREEZE
Selection of shock freeze at -18°C
HARD
Selection of hard blast chill cycle (+3°C) or shock freeze (-18°C)
DEFROST
Start/stop defrost. By pressing the button for extended time,
the temperature of the evaporator probe is displayed.
PROBE HEATING
Heating for extraction of food probe.
STERILISATION
Start/stop sterilisation process
PROGRAMME
Memory or recalls a blast chill/shock freeze cycle on memory
Description of the display and symbols
DISPLAY 1
Displays temperature of the food probe or time.
DISPLAY 2
Displays temperature of the cabinet.
DISPLAY 3
Displays the operational phase in progress (from 1 to 3).
Cabinet
temperature.
Heating active food probe.
Blast chill/shock freeze cycle with food probe
(fl ashing in food probe insertion test).
Blast chill/shock freeze cycle with timer.
Sterilisation in progress.
Blast chill cycle function selected (+3°C).
Shock freeze cycle function selected (-18°C).
Hard phase selected.
Blast chill in progress (fl ashing when active
compressor
delay).
Conservation phase in progress.
Machine in Stop mode.
DISPLAY 1
DISPLAY 2
DISPLAY 3
19 - GB
7. USER INSTRUCTIONS
7.1. CONTROL PANEL
