23 - GB
7.2.3. BLAST CHILL OR SHOCK FREEZE PERSONALIZE CYCLE ,
,
It is possible to modify the breakdown/freezing cycle:
-
timed
- probe
,
personalising them as required.
The breakdown or freezing cycle is divided into three phases where it is possible to modify the following
values:
IN ORDER TO MODIFY THE DATA IN NOT PERMANENT WAY
Press
the key relative to the cycle
(+3 soft), or the key
(-18 soft)
then
and then press the key
for extended time (+3 hard).
then
and then press the key
for extended time (-18 hard)
a- set cabinet temperature phase 1/2/3/4
Control displays (Fig. 8):
SCREEN
1-
modifi able cell temperature
SCREEN 2 - no signal (off)
SCREEN 3 – the number of the phase
(Fig.8)
The cell temperature symbol fl ashes, by pressing the
or
the value of the set temperature
is increased or decreased.
b- set pin temperature phase 1/2/3
With a further pressing the
the pin symbol fl ashes
, by pressing the
or
the
value of the set pin temperature is increased or decreased.
c- set duration phase 1/2/3
With a further pressing the
the clock
symbol fl ashes, by pressing the
or
the
value of the set duration is increased or decreased.
Repeat the same procedure described for the later phases 2 and 3.
Phase 4 of conservation only involves setting the set temperature. To confi rm the settings of all the
phases described, press the relevant key
or
for extended time.
Press
the
button to start the cycle.
At the end of the cycle the machine moves into conservation phase automatically, see ch. 7.2.5.
The new sets of the personalised cycle will be lost when the machine is stopped with key
.
See tecincal manual
S _ _ = setpoint
BLAST CHILL OR SHOCK FREEZE
CONSERVATION
PHASE 1
PHASE 2
PHASE 3
PHASE 4
SET CABINET
S01
S04
S07
S10
SET CORE
S02
S05
S08
- -
SET TIME
S03
S06
S09
- -
IN ORDER TO MODIFY THE DATA IN PERMANENT WAY (see tecincal manual)
