- 37 -
Conveyor speed
You can adjust the conveyor speed with the designated conveyor knob controller in
the range 0
– 10. At
”0“
setting, the conveyor does not stop, it is the lowest setting.
It is recommended to test the conveyor speed:for required food. To do so, follow
the instructions:
1. Set the required temperature and heat up the baking chamber for 5 - 10 minutes.
2. Turn the conveyor speed knob controller to position 4.
CAUTION!
Always use relevant baking trays, containers, etc., to prepare the food.
Do not place food directly on the conveyor.
Tough soiling of the conveyor with food scraps may cause damage
to the device.
3. To test the setting, place a sample product in a relevant tray on the conveyor.
4. If the product is too light, turn the conveyor speed knob controller anti-clockwise
to lower speed.
5. If the product is too dark, turn the conveyor speed knob controller clockwise to
higher speed.
Pizza baking
Set the device according to the food you wish to bake, as described above.
In the meantime, prepare the required food.
Place pizza in the relevant tray on the conveyor.
The conveyor moves through the baking chamber according to the setting you
selected. Your pizza is transported to the delivery tray at the rear of the device.
Remove the prepared pizza and serve.
Turning the device off:
Turn off the device with the main switch by pressing it downwards to
“OFF”
.
The power supply red indicator light is off.
