- 38 -
6. Cleaning
WARNING!
Before cleaning, turn the temperature knob controller for
top and bottom heater and conveyor speed knob controller
to “0”, set the main switch to “OFF” and disconnect the
device from the electric power supply (pull the plug!).
Leave the device to cool down completely.
Never use water jet to wash the device.
Protect the device from the water penetration.
CAUTION!
Never use sharp or scouring cleaning agents which may scratch the
surface of the device.
Never use corrosive or agressive cleaning agents, agents containing
gasoline or solvents.
Daily cleaning
o
Set the main switch to its
“OFF”
position, disconnect the device from the electric
power supply and leave to cool down.
o
Clean the housing of the device with a mild cleaning agent and soft, damp cloth.
o
Clean the delivery tray at the rear of the device. Use a mild cleaning agent and soft,
damp cloth.
o
Remove the crumb tray located under the conveyor, empty it, and clean with use of
a mild cleaning agent and soft, damp cloth.
o
Wipe the cleaned surfaces and elements thoroughly with a clean cloth to remove
residues of the cleaning agents. Finally, dry the device and accessories thoroughly.
o
Replace the crumb tray underneath the conveyor.
