Cleaning
32 / 36
610839
EN
Upper Splash Guard
1. Clean the splash guard regularly.
2. Remove the splash guard for cleaning.
Proceed the following way:
– Press both levers (b) at the same
time, at the left and right hand side,
and release the splash guard from
fixing openings.
– Press the splash guard down and pull
it to the front.
Fig. 8
3. Wash the splash guard in warm water and a mild cleaning agent.
4. Rinse in fresh water.
5. To end with, dry the splash guard thoroughly.
6. Install the splash guard in the appliance:
– Side it in diagonally into the inner chamber of the appliance, until rear
studs of the splash guard enter fixing openings of the rear wall of the
thermal processing chamber.
– Next, push the splash guard up.
– Slide the studs at the left and right hand side of the guard's front section
into fixing openings at the front, until they click.
Summary of Contents for 18180D
Page 1: ...18180D 610839...
