Installation and operation
18 / 36
610839
EN
5.4
Operation
Before Use
1. Empty the thermal processing chamber.
2. Before use, clean the appliance, observing instructions in section
6
'Cleaning'
.
3. Leave the door open for the chamber to dry completely.
Indications for User
• With first connection, all indicators are displayed in the digital display for 2
seconds and an audible signal sounds. Next, the appliance switches back to the
Standby mode and the digital display shows '0'.
• During the setting up process, the appliance returns to the Standby mode after
approx. 1 minute.
• If during thermal processing, STOP key is pressed once or door is open, the
appliance stops the current thermal processing program. To continue with the
thermal processing program, close the appliance door and press START key
again.
• If during the pause, STOP key is pressed once, the thermal processing program
is cancelled.
• When the thermal processing is finished, '0000' is shown in the digital display,
and a sound signal is emitted every two minutes until the user opens the door.
• If the thermal processing program was set in the microwave unit manually, the
digital display shows total time for all stages of the thermal processing in the
final thermal processing program, the symbol of the first processing stage and
the symbol of the number of the thermal processing, which is concurrent with
the given thermal processing program.
• Electronic control system of the microwave unit features the cooling option.
When the thermal processing is finished or following a pause, the appliance fan
operates automatically for approx. 1 minute to cool the electronic circuits and
extend the appliance life.
Summary of Contents for 18180D
Page 1: ...18180D 610839...
