background image

EN

page 22

WARNINGS
This instruction booklet must be kept with the machine for future con-
sultation. If this machine is sold or transferred to other users, make sure 
the booklet always goes with the unit so that the new owner can have all 
the necessary information on operations and all relevant instructions.

The instruction booklet must be carefully read before installation and before star-
ting the machine.
•  The connection to the electrical and water networks, for installing this unit, must 

be carried out by qualifi ed operators only.

•  This machine must only be used by adults. This is a professional machine to be used by 

qualifi ed personnel, installed and repaired exclusively by qualifi ed Technical Personnel. 
The Manufacturer declines any responsibility for improper installation, use, maintenance 
or repair.

•  This appliance can be used by trained youth aged from 15 years and above. It cannot 

be  used  by  persons  with  reduced  physical,  sensory  or  mental  capabilities  or  lack  of 
experience and knowledge.

•  Children shall not play with the appliance. 
•  Cleaning and user maintenance shall not be made by children without supervision.
•  Do not slam the doors when opening and closing.
•  Make sure the machine is not standing on the power cable or on the fi lling/drain hoses. 

Level the machine fl at, by adjusting the support feet.

•  Do not use this appliance or any part of it as a stepladder or support as it has been 

designed exclusively to bear the weight of its rack, containing the items to be washed.

•  This machine is designed exclusively for washing dishes, glasses and crockery 

with human food type of residue. Do not wash articles polluted with petrol, paint, 
chips of steel or iron. Do not wash fragile objects or material not resistant to the 
washing process. Do not use acidic corrosive chemical products or alkaline and 
solvents or chlorine based detergents.

•  Do not open the machine door when operating. In any case, the machine has a special 

safety device which immediately stops the unit if the door is open, thus preventing water 
spillage. Always  switch  the  machine  completely  off  and  drain  the  water  tank,  before 
accessing inside.

•  This machine must be disconnected from the electrical supply after use at the end 

of the day and for any service/maintenance operation. Switch off the main switch 
located on the wall, which shall be installed by a professional installer. Shut the 
water supply valve(s).

•  The  user  shall  not  carry  out  any  repair  and/or  maintenance  operations.  In  any  case 

contact qualifi ed personnel.

Summary of Contents for 110555




















Reviews: