8/28/20
6
Reset WiFi
–
Press Reset WiFi when having trouble with the WiFi connection. The
controller will reset the WiFi connection and attempt to reconnect to your currently
saved connection.
Manual WiFi Setup
–
Used to manually set up a WiFi network that is hidden or
otherwise not found when running WiFi Setup. Enter the network name under SSID and
press “
Save
”. Under Password, enter the network password at press “
Save
”.
WiFi Status
- Displays the currently connected network, WiFi signal strength, and cloud
connection status.
Headgrower Options
–
Used to set up the WeatherBoss for use with the Headgrower
App and desktop version.
Headgrower Via
–
Enable to allow the WeatherBoss to communicate to Headgrower.
Headgrower Network
–
Select appropriate option for the WeatherBoss to communicate
to Headgrower either as a Client, Hub, CIS, or Off. See your Headgrower manual for
more information.
Headgrower Channel
–
Select the appropriate communication channel for the
Headgrower app. See your Headgrower manual for more information.
Headgrower ID
–
Displays the HEadgrower ID for your controller. This is similar to your
controllers serial number and cannot be changed.
Humidity Cal
–
Used to enter the calibration code for the optional humidity sensor.
Calibration codes can be found on the Humidity Calibration sheet sent with your
humidity sensor. The humidity sensor does not come with the standard
WeatherBoss
but is an additional option. Set to 0 if no sensor is connected.
Light Sensor Source
–
Used to activate or deactive the light sensor option. Select Off if
no sensor is used or select Apogee SQ-110-SS if the light sensor is attached. After
making th
e selection, press “
Save
”.
Reset Factory Defaults
-
Resets all settings to factory defaults. Upon selection, you will be
asked to confirm before the controller will be reset.
Calibrate Touch
–
Used to re-
calibrate the touch screen if buttons aren’t working
properly.
Press the “
Calibrate Touch
” button and follow the onscreen instruction to re
-calibrate.
Factory Protected
-
Factory protected is used by Bartlett to set controller and display modes.
