![background image](http://html1.mh-extra.com/html/bartlett/700-series/700-series_operation-manual_3966174003.webp)
2
Introduction
This manual covers the operation of the V6-CF series 700 kiln controller. The V6-CF is a
versatile controller that regulates the temperature in your kiln so you can fire a variety of products like
ceramics, glass, or jewelry. The experienced operator can go straight to the quick start guide. The novice
can learn more about different types of firing by reading the programming sections of the manual and the
ceramics and glass introductions on our web site
www.bartinst.com
.
In the following pages:
First Firing steps you through the initial firing for new kilns to “season” the elements.
Controller Front Panel is a visual table-of-contents for the function of each key on the face-plate.
Cone Fire is the quick, easy method of programming for ceramics.
Vary Fire (also known as ramp-hold) is the versatile programming method for writing your own profiles
for glass, jewelry and ceramics.
The other sections of the manual will answer questions about what to expect during a firing.
Precautions
The controller is used to control temperature; it is not a safety device.
Do not operate the controller in temperatures above 125
o
F.
Always supervise your kiln during a firing.
The controller contains electronic components which are sensitive to static electricity. Before handling the
controller dissipate any static charge you may have by touching metal or a screw on the controller panel, the
electrical box, the kiln lid, or some other grounded object.
Always check the position of the thermocouple probe before starting a firing. The current temperature
displayed on the controller is measured at the end of the thermocouple which must be in the firing chamber
about 1” to 1-1/2”. Seal the opening around the thermocouple with kaowool or similar material if
necessary.
Always review the current program (by pressing Review Program) before firing to ensure the correct profile
is programmed.
Ensure the kiln and the areas around the kiln are clear of combustible material. See kiln manufacture’s
recommendation on required clearances.