14
END OF FIRING - CPLT
End of firing
At the end of the firing, the display will flash between
CPLT / Firing time / kiln temperature
Press ENTER to return to
IdLE
The display will now flash IdLE / kiln temperature. You may open the kiln
when the temperature has cooled to 150°F.
Review the Results
After a firing record the firing time, and load size. In your log keep any repair information. If
cones are placed in the kiln, record the amount of bending that took place.
A properly bent cone indicates that the kiln is functioning properly and accurately. The tip of the
cone will be level with the top of the cone’s base when fired properly. The diagrams below will give you
an idea of a properly fired, under fired and over fired cone. Some variation from a proper bend is
expected and can be compensated for with the cone offset adjustment for each particular cone number
based on test firings.
NOTE – An error code ( E- ) in the display indicates an abnormal end to a firing.
See the Error code section to help determine the reason for the
error code.
Proper bend
Under fired
Over fired
