SG10
OIPB – B19053
OWNER’S MANUAL
7
Operating Safety continued:
Allow the engine to cool before adding fuel or performing service and maintenance functions.
Contact with hot components can cause serious burns.
The engine section of this saw requires an adequate free flow of cooling air. Never operate the
saw in any enclosed or narrow area where free flow of the air is restricted. If the air flow is
restricted it will cause serious damage to the saw or engine and may cause injury to people.
Remember the saw’s engine gives off deadly carbon monoxide gas.
Always refuel in a well-ventilated area, away from sparks and open flames.
Always use extreme caution when working with flammable liquids. When refueling, stop the
engine and allow it to cool. Do not smoke around or near the machine. Fire or explosion could
result from fuel vapors, or if fuel is spilled on a hot engine.
Never operate the saw in an explosive atmosphere or near combustible materials. An explosion
or fire could result causing severe bodily harm or even death.
Topping-off to the fuel filler port is dangerous, as it tends to spill. Never use fuel as a cleaning
agent.
Always read, understand, and follow procedures in operator’s Manual before attempting to
operate equipment.
Always be sure to operator is familiar with proper safety precautions and operating techniques
before using the saw.
Stop the engine when leaving the saw unattended.
Block the unit when leaving or when using on a slope.
Maintain this equipment in a safe operating condition at all times.
Always stop the engine before service, adding fuel and oil.
Never run engine without air filter. Severe engine damage may occur. Always service air
cleaner frequently to prevent carburetor malfunction.
Always store equipment properly when it is not being used. Equipment should be stored in a
clean, dry location out of the reach of children.
Discount-Equipment.com