SG10
OIPB – B19053
OWNER’S MANUAL
11
Operation SG10
Application
This equipment is designed for dry sawing of concrete slabs utilizing diamond blades. The
equipment has been engineered for general and industrial flat sawing applications that include:
Joint Sawing of Green Concrete, Decorative Sawing in Cured Concrete, Light Demolition
Sawing and V Groove Beveling. The simple and compact nature of the machine makes it a
perfect sawing tool for one person to operate and transport. The saw combines innovative
features, top quality components, and a committed attention to state-of-the-art manufacturing.
Operating Principle
The following instructions were compiled to provide you information on how to obtain long and
trouble-free use of the unit. Periodic maintenance of this unit is essential. Read the manual in
its entirety and follow the instructions carefully. Failure to do so may injure yourself or a
bystander.
Starting Procedure - WARM CLIMATE:
Open fuel valve on gas tank. Set throttle lever to “Fast” idle position, set choke to closed
position, start engine. Open choke slightly to prevent flooding. Move to “Open” or “Run” position
when engine is warm, increase throttle.
Starting Procedure - COLD CLIMATE:
Follow same procedure as above but allow longer warm-up period – 3 to 5 minutes. In cold
weather, oil is much heavier to move and requires more time to work its way into the moving
parts. If maximum power is not attained, allow further warm-up time. Fill fuel tank with clean
gasoline, use safety approved gas containers.
Do not mix oil with gasoline – use unleaded
gas only.
Shutdown Procedure:
1. Throttle engine down.
2. Depress or turn off stop switch.
Delivery Checks
Read the operation manual completely—it could save a great deal of unnecessary expense.
Read the engine manual supplied.
Check the general condition of the equipment—has it been damaged during delivery? Any
damage should be immediately reported to the carrier and a claim registered.
Check engine oil and fuel levels.
Immediately upon taking delivery of your new equipment and before putting it into service:
Discount-Equipment.com